Differences

This shows you the differences between two versions of the page.

--- jaguar:base-control [2020/05/06 12:54] – [How to use] a18mitri
+++ jaguar:base-control [2020/05/06 12:55] (current) – [External links] a18mitri
@@ Line 14: / Line 14: @@
 Ubuntu 16.04 (Ubuntu 18/20.04 may pose problems with connection to the robot)
 ROS Kinetic
 Packages: drrobot_5dofmanipulator_ctrl, drrobot_jaguar_v6 (https://partage.imt.fr/apps/files/?dir=/Shared/Jaguar_packages&fileid=181131485)
@@ Line 26: / Line 28: @@
 operator detail information of the surrounding. Besides the ready to use control and navigation software, a full
 development kit including SDK, data protocol and sample codes, is also available.
 The robotic arm is light on weight, low on power consumption and compact on size. It has 3 DOF + 1 DOF gripper, with maximum reach of over 707mm (28 in), max payload capacity of 4Kg at max reach, while weights under 10Kg. Wrist mounted color
 video camera provides high resolution (720 x 480) close-up view. Jaguar Arm is ideal for object inspection and
@@ Line 40: / Line 44: @@
 Turn the main switch to "ON" position.
--
 Press and hold the start button for about 1 second, then release.
--
 To power off the robot, turn the main switch to "OFF" position, the system will shut down.
--
 After turn on the robot, please make sure your PC could find the WiFi network with SSID “DriJaguar”, and
 connect with this network with key “drrobotdrrobot”.
--
 After successful connection, please fix your PC IP address as “192.168.0.104” at this wireless interface.
--
 Launch roscore.
--
 Launch base control node:
 rosrun drrobot_jaguar_v6_node drrobot_jaguar_v6_node
--
 Launch arm control node:
 rosrun drrobot_5dofmanipulator_ctrl drrobot_5dofmanipulator_ctrl_node
@@ Line 68: / Line 72: @@
 http://wiki.ros.org/Robots/Jaguar
+ROS drrobot packages:
+https://partage.imt.fr/apps/files/?dir=/Shared/Jaguar_packages&fileid=181131485