hardware:robotnik_rb-1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
hardware:robotnik_rb-1 [2019/07/23 08:38] – [Requirements] ppapadakishardware:robotnik_rb-1 [2020/01/17 09:56] (current) – [Uses] ppapadakis
Line 26: Line 26:
 (ii) **Indirect use** via connecting to the robot's built-in WiFi network and subsequently via a terminal of a computer that has installed ROS and required packages. (ii) **Indirect use** via connecting to the robot's built-in WiFi network and subsequently via a terminal of a computer that has installed ROS and required packages.
  
-For (i) and (ii), instructions are provided in the documentation 'RB-1-software-doc.pdf' (see Description sub-section)+For (i) and (ii), instructions are provided in 'How to use' sub-section
 ===== Description ===== ===== Description =====
  
 You can here give a more detailed description of the product. Include pictures and figures to explain what it looks like, how it works, etc. You can here give a more detailed description of the product. Include pictures and figures to explain what it looks like, how it works, etc.
 +
 +{{:hardware:rb-1.png?400|}}
 +
 +The hardware configuration and contents of the robot are documented in {{ :hardware:rb-1-hardware.doc.pdf |}}.
  
 ===== Configuration ===== ===== Configuration =====
Line 35: Line 39:
 Detail here the configuration process, the different options, and how to set it up (first time or afterwards). Detail here the configuration process, the different options, and how to set it up (first time or afterwards).
  
 +A quick-start document is provided {{ :hardware:rb-1-quickstart.doc.pdf |}}
 ===== How to use ===== ===== How to use =====
  
Line 40: Line 45:
 It is also recommended to add a method (of a few methods even) to test the working of the product, like demos or a specific process. It is also recommended to add a method (of a few methods even) to test the working of the product, like demos or a specific process.
 If you think a more complete tutorial is needed, please create another page for it, and link it here. If you think a more complete tutorial is needed, please create another page for it, and link it here.
 +
 +A complete software documentation is provided {{ :hardware:rb-1-software.doc.pdf |}} with some annotations on the .pdf.
 +
 +
 +**ATTENTION**
 +
 +The robot does not currently have a mechanism to safely 'park' the Kinova arm before the robot is switched off. As a result, once the robot is switched off, the arm will start falling under the influence of gravity, potentially damaging itself or anything along its path. The fall of the arm can be prevented either by teleoperating it to a safe (stable) position, or by holding it and gently moving it to a safe position **after** having it switched off.
  
 ===== Uses ===== ===== Uses =====
Line 46: Line 58:
 If possible, add internal links to the project description page (or integrate them as shown in the best practice page). If possible, add internal links to the project description page (or integrate them as shown in the best practice page).
  
 +**Repairing of detached finger(s) of robotic arm**
 +
 +The fingers of the grippers have been designed so that if excessive force is applied on them, they do not get broken but instead they get "detached" from their tendons. To put back into place the detached fingers, one has to delicately reattach the fingers to their tendons. The instructions provided by an e-mail of the ROBOTNIK constructor are as follows:
 +
 +//Our support team told us the following advice: We have to insert the cotter pin into the holes (As the picture shows)//
 +
 +{{:hardware:image.png|}}
 +
 +//Shiftiness steps:
 +
 +1. Close the robotic hand
 +
 +2. Pull carefully the disabled finger 
 +
 +3. Gently with caution, with a little screwdriver, strip the part (green coloured)
 +
 +4. Insert one by one the cotter pin into the holes (as the blue arrow shows)
 +//
 ===== External links ===== ===== External links =====
  
-  *  https://github.com/RobotnikAutomation+  * https://github.com/RobotnikAutomation/rb1_common 
  
  
  
  • hardware/robotnik_rb-1.1563871106.txt.gz
  • Last modified: 2019/07/23 08:38
  • by ppapadakis