Differences

This shows you the differences between two versions of the page.

--- hardware:rb1_quickstart [2021/02/12 13:54] – [From a remote computer] cedric.lb
+++ hardware:rb1_quickstart [2021/02/12 14:25] (current) – [Controlling the kinova-arm only] cedric.lb
@@ Line 72: / Line 72: @@
     rb1@rb1:~$ roslaunch rb1_jaco_3fg_moveit_config demo_rtc.launch
-This will open rviz and moveit.
+This will open rviz and moveit. In Motion Planning > Planning Request > Planning Group, select 'rb1_arm'. By default, it is on 'gripper' and they cannot be controlled via the moveit interface.
+{{hardware:rb1_real_moveit_indigo_arm.png?500}}
-Select the rb1_arm and move the arm around, plan and execute.
+The arm can now be moved as wanted.
+{{hardware:rb1_real_moveit_rviz.png?500}}
 ==== From a remote computer ====
-The rb1 can also be controlled remotely from a computer. First, connect to the robot's Wifi, open a terminaml and type:
+The rb1 can also be controlled remotely from a computer. First, connect to the robot's Wifi, open a terminal and type:
     user@remote:~$ export ROS_MASTER_URI=http://rb1:11311
@@ Line 100: / Line 103: @@
 Rviz and move it can now be started to control the robot:
    user@remote:~/catkin_rb1_ws$ source devel/setup.bash
    user@remote:~/catkin_rb1_ws$ roslaunch rb1_jaco_3fg_moveit_config demo_rtc.launch
@@ Line 124: / Line 127: @@
 This will start rviz and moveit and allow control of the arm.
+{{hardware:kinova_rviz.png?500}}
 More further information and additional launchfiles: {{ https://github.com/Kinovarobotics/kinova-ros/wiki/MoveIt }}
@@ Line 136: / Line 141: @@
 and "Action client not connected: rt_traj_exe/follow_joint_trajectory"**
-First, check whether the rt_traj_exe/follow_joiny_tractoryis visible on the computer.
+First, check whether the rt_traj_exe/follow_joiny_tractory is visible on the computer.
    user@remote:~$ rostopic list