Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
mobile_vehicule [2016/02/19 13:41] nfave [Instructions] |
mobile_vehicule [2016/02/19 13:52] nfave [Requirements] |
||
|---|---|---|---|
| Line 15: | Line 15: | ||
| You must also install the openni_tracker_modified package [[OpenniTrackerModified]] with the driver for the kinect [[LinkToDriver]] and the rosserial_arduino package http://wiki.ros.org/rosserial_arduino/Tutorials/Arduino%20IDE%20Setup. If you don't know how to do this, see the tutorial http://wiki.ros.org/ROS/Tutorials/CreatingPackage. You have to use the Indigo distro and the Catkin package type. | You must also install the openni_tracker_modified package [[OpenniTrackerModified]] with the driver for the kinect [[LinkToDriver]] and the rosserial_arduino package http://wiki.ros.org/rosserial_arduino/Tutorials/Arduino%20IDE%20Setup. If you don't know how to do this, see the tutorial http://wiki.ros.org/ROS/Tutorials/CreatingPackage. You have to use the Indigo distro and the Catkin package type. | ||
| - | To finish, you have to install the last version of the [[arduino|Arduino IDE]] on your computer https://www.arduino.cc/en/Main/Software. | + | To finish, you have to install the version 1.6.5 or 1.6.6 of the [[arduino|Arduino IDE]] on your computer https://www.arduino.cc/en/Main/Software. |
| Line 41: | Line 41: | ||
| - When you are uploading the code on the arsuino Due, be sure to have stop the rosserial_python process. | - When you are uploading the code on the arsuino Due, be sure to have stop the rosserial_python process. | ||
| + | |||
| - If the wheels are turning in the bad way, are too fast or are trembling, check the connections of the motors supply (AO1 and AO2) and the connections of the encoders. | - If the wheels are turning in the bad way, are too fast or are trembling, check the connections of the motors supply (AO1 and AO2) and the connections of the encoders. | ||
| - | - | ||
| ===== Source Code ===== | ===== Source Code ===== | ||