Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
jaguar:base-control [2020/05/06 12:54] a18mitri [How to use] |
jaguar:base-control [2020/05/06 12:54] a18mitri [How to use] |
||
---|---|---|---|
Line 40: | Line 40: | ||
Turn the main switch to "ON" position. | Turn the main switch to "ON" position. | ||
- | - | + | |
Press and hold the start button for about 1 second, then release. | Press and hold the start button for about 1 second, then release. | ||
- | - | + | |
To power off the robot, turn the main switch to "OFF" position, the system will shut down. | To power off the robot, turn the main switch to "OFF" position, the system will shut down. | ||
- | - | + | |
After turn on the robot, please make sure your PC could find the WiFi network with SSID “DriJaguar”, and | After turn on the robot, please make sure your PC could find the WiFi network with SSID “DriJaguar”, and | ||
connect with this network with key “drrobotdrrobot”. | connect with this network with key “drrobotdrrobot”. | ||
- | - | + | |
After successful connection, please fix your PC IP address as “192.168.0.104” at this wireless interface. | After successful connection, please fix your PC IP address as “192.168.0.104” at this wireless interface. | ||
- | - | + | |
Launch roscore. | Launch roscore. | ||
- | - | + | |
Launch base control node: | Launch base control node: | ||
rosrun drrobot_jaguar_v6_node drrobot_jaguar_v6_node | rosrun drrobot_jaguar_v6_node drrobot_jaguar_v6_node | ||
- | - | + | |
Launch arm control node: | Launch arm control node: | ||
rosrun drrobot_5dofmanipulator_ctrl drrobot_5dofmanipulator_ctrl_node | rosrun drrobot_5dofmanipulator_ctrl drrobot_5dofmanipulator_ctrl_node |