Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
jaguar:base-control [2020/05/06 12:52] a18mitri |
jaguar:base-control [2020/05/06 12:53] a18mitri [How to use] |
||
---|---|---|---|
Line 39: | Line 39: | ||
===== How to use ===== | ===== How to use ===== | ||
- | 1. Turn the main switch to "ON" position. | + | Turn the main switch to "ON" position. |
- | 2. Press and hold the start button for about 1 second, then release. | + | Press and hold the start button for about 1 second, then release. |
- | To power off the robot, turn the main switch to "OFF" position, the system will shut down. | + | To power off the robot, turn the main switch to "OFF" position, the system will shut down. |
- | 3. After turn on the robot, please make sure your PC could find the WiFi network with SSID “DriJaguar”, and | + | After turn on the robot, please make sure your PC could find the WiFi network with SSID “DriJaguar”, and |
connect with this network with key “drrobotdrrobot”. | connect with this network with key “drrobotdrrobot”. | ||
- | 4. After successful connection, please fix your PC IP address as “192.168.0.104” at this wireless interface. | + | After successful connection, please fix your PC IP address as “192.168.0.104” at this wireless interface. |
- | 5. Launch roscore. | + | Launch roscore. |
- | 6. Launch base control node: | + | Launch base control node: |
- | rosrun drrobot_jaguar_v6_node drrobot_jaguar_v6_node | + | rosrun drrobot_jaguar_v6_node drrobot_jaguar_v6_node |
- | 7. Launch arm control node: | + | Launch arm control node: |
- | rosrun drrobot_5dofmanipulator_ctrl drrobot_5dofmanipulator_ctrl_node | + | rosrun drrobot_5dofmanipulator_ctrl drrobot_5dofmanipulator_ctrl_node |
PS Recharge the robot after every drawn-out usage. | PS Recharge the robot after every drawn-out usage. |