Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
poppy-kine:poppy_grr_keraal [2017/03/14 14:35]
mai [How to use the application]
poppy-kine:poppy_grr_keraal [2020/06/11 21:46]
mai
Line 1: Line 1:
-====== Poppy GRR Keraal====== +====== Poppy GRR Keraal: The web interface to record and replay movements ​====== 
-{{tag>​poppy software}}+{{tag>​poppy software ​poppy-kine}}
  
 Poppy GRR Keraal is an application created by Damien Deguyenne from Génération Robots. It allows to record movements with Poppy, to combine them and to replay them. Poppy GRR Keraal is an application created by Damien Deguyenne from Génération Robots. It allows to record movements with Poppy, to combine them and to replay them.
Line 6: Line 6:
 ===== Application Installation ===== ===== Application Installation =====
  
-The application can be found here: https://​github.com/​GRLab/​Poppy_GRR_Keraal +The application can be found here: https://​github.com/​GRLab/​Poppy_GRR 
-Documentation on how to install the application is available in english ​{{:​poppygrr-applicationinstallation_en.pdf|}} and french ​{{:​poppygrrkeraal-installationdelapplication.pdf|}}.+Documentation on how to install the application is available in English ​{{:​poppygrr-applicationinstallation_en.pdf|}} and French ​{{:​poppygrrkeraal-installationdelapplication.pdf|}}.
  
 ===== How to use the application ===== ===== How to use the application =====
  
-Documentation on how to use the application is available in english ​{{:​poppygrr-fonctionnementdelapplication_en.pdf|}} and french ​{{:​poppygrr-fonctionnementdelapplication.pdf|}}.+Documentation on how to use the application is available in French {{poppy-kine:​poppygrr-manuel_utilisation_keraalapp.pdf}}. 
 + 
 +For more details about the informatics structure and debugging for a previous version is available in English ​{{:​poppygrr-fonctionnementdelapplication_en.pdf|}} and French ​{{:​poppygrr-fonctionnementdelapplication.pdf|}}.
  
 The application works only with the new version of the Poppy robot which has a Rasberry Pi 3 instead of an odroid xu 4. As the ethernet port is not available, the connexion to the Rasberry Pi is done using Wifi. The application works only with the new version of the Poppy robot which has a Rasberry Pi 3 instead of an odroid xu 4. As the ethernet port is not available, the connexion to the Rasberry Pi is done using Wifi.
Line 19: Line 21:
 Note that if you want to manage the wifi networks configurations of the robot in ssh, you need to modify the file: /​etc/​wpa_supplicant/​wpa_supplicant.conf. Note that if you want to manage the wifi networks configurations of the robot in ssh, you need to modify the file: /​etc/​wpa_supplicant/​wpa_supplicant.conf.
  
-In short: ​ 
  
-* start wamp and check the light is green (the server is on) +==== In short ==== 
-* open a browser and go to page localhost/​poppyApp/​poppygrr.php +  
-* start up the robot'​s raspberry pi and the motors. Wait until poppy finds its motors and says "je suis pret. En fait, mon nom est Poppy"​ + 
-* in the browser, input in the field "​Poppy"​ : poppy.local+  ​* start wamp and check the light is green (the server is on) 
 +  * open a browser and go to page localhost/​poppyApp/​poppygrr.php 
 +  * start up the robot'​s raspberry pi and the motors. Wait until poppy finds its motors and says "je suis pret. En fait, mon nom est Poppy"​ 
 +  * in the browser, input in the field "​Poppy"​ : poppy.local ​or its IP. 
 +  
 + 
 +===== Using computer as wifi hotspot ===== 
 + 
 +Instead of connecting both the computer and Poppy in the same network, you can use the computer as wifi hotspot and share internet connexion if you want. 
 + 
 +Windows: 
 + 
 +Open a terminal and run the following command by replacing '​MyNetwork'​ and '​MyKey'​ by your network name and password: 
 +<​code>​netsh wlan set hostednetwork mode=allow ssid=MyNetwork key=MyKey</​code>​ 
 +Then run this command to start your network: 
 +<​code>​netsh wlan start hostednetwork</​code>​ 
 + 
 +Now the hotspot is created. To stop it run this command: 
 +<​code>​netsh wlan stop hostednetwork</​code>​ 
 + 
 +Once the hotspot is created, you can share the internet connexion from ethernet. Go in Control Panel > Network and Internet > Network and Sharing Center. Click on the connexion you want to share and the on '​Properties'​. In the '​sharing'​ tab check the 'Allow other users to connect...'​ and select your new created hotspot connexion in the list. 
 + 
 +In the example below, the created hotspot in called '​kinectServer'​ and the internet connexion is shared from '​eduroam'​ 
 + 
 +{{:​poppy-kine:​wifihotspot.png?​800|}} 
 + 
 + 
  • poppy-kine/poppy_grr_keraal.txt
  • Last modified: 2020/06/11 21:46
  • by mai