Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
hardware:rb1_quickstart [2021/02/12 13:53]
cedric.lb [Controlling the kinova-arm only]
hardware:rb1_quickstart [2021/02/12 14:23]
cedric.lb [From the rb1 directly]
Line 72: Line 72:
     rb1@rb1:~$ roslaunch rb1_jaco_3fg_moveit_config demo_rtc.launch     rb1@rb1:~$ roslaunch rb1_jaco_3fg_moveit_config demo_rtc.launch
  
-This will open rviz and moveit.+This will open rviz and moveit. ​In Motion Planning > Planning Request > Planning Group, select '​rb1_arm'​. By default, it is on '​gripper'​ and they cannot be controlled via the moveit interface. 
 +  
 +{{hardware:​rb1_real_moveit_indigo_arm.png?​500}}
  
-Select the rb1_arm and move the arm around, plan and execute.+The arm can now be moved as wanted.
  
 +{{hardware:​rb1_real_moveit_rviz.png?​500}}
 ==== From a remote computer ==== ==== From a remote computer ====
  
-The rb1 can also be controlled remotely from a computer. First, connect to the robot'​s Wifi, open a terminaml ​and type:+The rb1 can also be controlled remotely from a computer. First, connect to the robot'​s Wifi, open a terminal ​and type:
  
     user@remote:​~$ export ROS_MASTER_URI=http://​rb1:​11311     user@remote:​~$ export ROS_MASTER_URI=http://​rb1:​11311
Line 95: Line 98:
    ​user@remote:​~$ scp -r rb1@rb1:​~/​catkin_ws/​src/​* ~/​catkin_rb1_ws/​src/​    ​user@remote:​~$ scp -r rb1@rb1:​~/​catkin_ws/​src/​* ~/​catkin_rb1_ws/​src/​
    ​user@remote:​~$ cd ~/​catkin_rb1_ws    ​user@remote:​~$ cd ~/​catkin_rb1_ws
-   ​user@remote:​~/​catkin_rb1_ws/$ catkin_make ​  +   ​user@remote:​~/​catkin_rb1_ws$ catkin_make ​  
  
 Some robot-specific packages may fail compiling (missing dynamixel.h / libpcan.h). If those are the only errors, you may continue. Some robot-specific packages may fail compiling (missing dynamixel.h / libpcan.h). If those are the only errors, you may continue.
  
 Rviz and move it can now be started to control the robot: Rviz and move it can now be started to control the robot:
-  + 
-   ​user@remote:​~/​catkin_rb1_ws/$ source devel/​setup.bash +   ​user@remote:​~/​catkin_rb1_ws$ source devel/​setup.bash 
-   ​user@remote:​~/​catkin_rb1_ws/$ roslaunch rb1_jaco_3fg_moveit_config demo_rtc.launch+   ​user@remote:​~/​catkin_rb1_ws$ roslaunch rb1_jaco_3fg_moveit_config demo_rtc.launch
  
 ===== Controlling the kinova-arm only ===== ===== Controlling the kinova-arm only =====
Line 136: Line 139:
 and "​Action client not connected: rt_traj_exe/​follow_joint_trajectory"​** and "​Action client not connected: rt_traj_exe/​follow_joint_trajectory"​**
  
-First, check whether the rt_traj_exe/​follow_joiny_tractoryis ​visible on the computer.+First, check whether the rt_traj_exe/​follow_joiny_tractory is visible on the computer.
  
    ​user@remote:​~$ rostopic list    ​user@remote:​~$ rostopic list
  • hardware/rb1_quickstart.txt
  • Last modified: 2021/02/12 14:25
  • by cedric.lb