Differences
This shows you the differences between two versions of the page.
robocup:robotic_arm_controler_package [2017/03/31 11:49] mai ↷ Links adapted because of a move operation |
robocup:robotic_arm_controler_package [2019/04/25 14:08] |
||
---|---|---|---|
Line 1: | Line 1: | ||
- | ====== Robotic_arm_controler (ROS package) ====== | ||
- | {{tag> ROS ros_package software}} | ||
- | =====Overview===== | ||
- | This package do the link between [[robobcup:robotic_arm_package]], the [[robocup:objects_detection_package]] and the user. It also possesses a launch file that launch all these packages. | ||
- | When this package receive a target position (/arm_controler/new_coordinates), it will move the object on the last position known to the new position | ||
- | |||
- | =====Installation===== | ||
- | This package was developed for the Indigo distro and is using the catkin package type. | ||
- | |||
- | To install it, you just have to download the following archives and extract it in .../catkin_ws/src, then open a console, go to catkin_ws and enter the command | ||
- | catkin_make | ||
- | |||
- | {{:robotique_arm_control.tar.gz|}} | ||
- | |||
- | You will also need to install the others packages in order to use all the features. | ||
- | |||
- | =====Quick tests===== | ||
- | |||
- | Open a console and enter the command : | ||
- | |||
- | rosrun robotique_arm_controler robotique_arm_controler | ||
- | |||
- | If you have installed all package of the robotic arm and the oject detection, you can instead enter this command | ||
- | |||
- | roslaunch robotique_arm_controler robotic_arm.launch | ||
- | |||
- | In both case, you will need to enter this command in another console in order to send the command to the arm : | ||
- | |||
- | rostopic pub -1 /arm_controler/new_coordinates geometry_msgs/Pose "{position:[X, Y, Z], orientation:[0, 0, 0, 0]}" | ||
- | |||
- | =====API===== | ||
- | ====Subscribed topics==== | ||
- | /object_detection/red_objects_position (geometry_msgs/PoseArray) | ||
- | |||
- | This topic will send the position of the object detected (currently only the red object are detected and only the first object is used by robotic_arm_controler). | ||
- | |||
- | /arm_controler/new_coordinates (geometry_msgs/Pose) | ||
- | |||
- | This topic is used to send the position where the object must be move. | ||
- | |||
- | ====Published topics==== | ||
- | /arm_controler/arm_command (geometry_msgs::PoseArray) | ||
- | |||
- | This is the result of the other two topics, it is the command for the [[robobcup:robotic_arm_package]], giving the position of the object and then the target position | ||
- | =====Bug reports and feature requests===== | ||
- | * There is an English error in the name |